Does a one-chair hairdresser legally need a fire risk assessment?

Yes. The Regulatory Reform (Fire Safety) Order 2005 applies to every non-domestic premises, regardless of size. A one-chair salon still uses heated electrical appliances (straighteners, tongs, dryers), chemicals and has members of the public on the premises — so a suitable and sufficient assessment is a legal requirement, not optional.

What should a salon fire risk assessment cover?

It must cover your heated appliances and how they are switched off and stored, socket loading (salons routinely run many high-wattage devices on shared circuits), chemical and aerosol storage, the single escape route through a compact floorplate, and housekeeping around styling chairs and trolleys. We give you a written action plan tied to the RRO 2005.

How quickly can a hairdresser get the assessment done?

Most salons use our Fast Track tier (£199) with same-week appointments and the report delivered within 48 hours. You can book online in minutes and the assessor confirms a time that suits your salon's quiet period.

What are the main fire risks in solar panel installers?

The key fire risks we assess in solar panel installers premises are: High-bay racking & storage fire load; Long travel distances to exits; Forklift charging & battery risk; Flammable & hazardous substances; Machinery & process ignition sources; Smoke detection in large volumes. Our assessor inspects each of these against how your premises are actually used, then gives you a prioritised, RRO 2005-aligned action plan.

How much does a solar panel installers fire risk assessment cost?

HawkSwift Solar Panel Installers fire risk assessments start from £549 + VAT (fixed price, no hidden fees). The exact figure is confirmed instantly in our quote form based on premises size, occupancy and complexity, with the report delivered within 48 hours.

Do warehouses and industrial units need a fire risk assessment?

Yes. Any workplace, including warehouses, factories and industrial units, must have a current fire risk assessment under the RRO 2005. The higher fire load and longer escape distances make a thorough assessment especially important.

Do you assess storage of flammable or hazardous materials?

Yes. Our assessors review the storage, handling and separation of flammable and dangerous substances, along with racking layout, travel distances and detection, giving you a clear plan to control the risk.

How much does a warehouse fire risk assessment cost?

Most warehouses and industrial units fall into the Standard tier at £549. Smaller units may qualify for Fast Track (£349); very large or high-hazard sites may need Enhanced. The quote form gives your exact price.

Solar Panel Installers Fire Risk Assessment in Southampton

Built for Solar Panel Installers

High fire load • Racking & storage • Process risk reviewed

Reviewed by Chris Banks, Commercial Director & NEBOSH-qualified assessor · Last reviewed October 2026

Warehouses and industrial units present a distinct fire-safety challenge: high storage density, long travel distances to exits, and often machinery, forklifts and flammable materials. A thorough fire risk assessment is essential to protect staff and stock and to satisfy your insurer. HawkSwift's assessors understand industrial environments and produce practical, compliant reports. This page is tailored specifically to solar panel installers premises.

Solar panel installation businesses face unique fire hazards, primarily involving the storage of lithium-ion batteries and the handling of live electrical components during testing. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must manage the risks of electrical ignition and thermal runaway. A competent assessor will specifically verify that battery storage areas are adequately ventilated and separated from combustible materials to prevent rapid fire spread, ensuring compliance with both the RRO 2005 and the Fire Safety (England) Regulations 2022.

Book Your Solar Panel Installers Assessment Call us on 07718 611 667

Scope of Review

What We Check for Solar Panel Installers

Every assessment is tailored to the real risks of your premises type.

01High-bay racking & storage fire load

02Long travel distances to exits

03Forklift charging & battery risk

04Flammable & hazardous substances

05Machinery & process ignition sources

06Smoke detection in large volumes

Investment